BRS Computing

420 Columbus Avenue, Suite 100

Valhalla, NY 10595

Telephone: 914-747-0201 or 914-747-4015

BRS Computing from New York City – New York State Thruway, I87

WARNING: Commercial vehicles are prohibited from most parkways, including the Saw Mill River Parkway. Contact BRS for alternate directions if needed. The ongoing rehabilitation of Interstate 287 and intersecting roads, including I87, has been completed in this area.

Note: Signs are indicated in italics

Major Deegan Expressway/New York State Thruway north.

After passing Dobbs Ferry/Ardsley area, exit at Saw Mill River Parkway north.

Continue on Saw Mill River Parkway to Thornwood/Marble Avenue exit.

Exit ramp is very short. Keep in right lane. Turn right at light onto Marble Avenue.

Continue straight through hamlet of Thornwood. Marble Avenue becomes Kensico Road at first traffic light. The road climbs a hill, and becomes Columbus Avenue.

After passing Rose Hill Shopping Center entrance on left, continue through one more traffic light, and get in the left lane. At second traffic light turn left onto Lozza Drive.

BRS Computing is located at 420 Columbus Avenue, first building on the right. Make an immediate right. Visitor parking is located directly in front of building. Inside the front door is an entry control panel. Dial 100 on the panel, and our phone will ring. Press zero to connect to the receptionist. When connected, tell us that you are at the front door, and our receptionist will release the lobby door lock, and you may enter. BRS offices are to the right, through the lobby, keeping to the right to the end of the hall.