BRS
Computing from North via Saw Mill River Parkway/I84/I684
Note: Signs are indicated in italics
Explanation: The Saw Mill River Parkway may be used for
access from northern Westchester, Putnam, and Duchess counties, north and west
Connecticut, and New England. Interstate
route 84 connects with 684 south near the NY-Connecticut border, which may be
approached from the east or west. Also
note that commercial vehicles are prohibited from most parkways, including the
Saw Mill River Parkway. Contact BRS for
alternate directions if needed.
I684
south, exit at Saw Mill River Parkway
south.
Continue
on Saw Mill River Parkway south to exit 27, Thornwood/Marble
Avenue. This is a left lane exit,
so it is advised to get in the left lane after passing Exit 29.
Exit
ramp is very short. Move to the right
lane. Turn right at light onto Marble
Avenue.
Continue
straight through hamlet of Thornwood.
Marble Avenue becomes Kensico Road at first traffic light. The road climbs a hill, and becomes Columbus
Avenue.
After
passing Rose Hill Shopping Center entrance on left, continue through one more
traffic light At second traffic light
turn left onto Lozza Drive.
BRS
Computing is located at 420 Columbus Avenue, first building on the right. Make an immediate right. Visitor parking is located directly in front
of building. Inside the front door is
an entry control panel. Dial 100 on the
panel, and our phone will ring. Press
zero to connect to the receptionist.
When connected, tell us that you are at the front door, and our
receptionist will release the lobby door lock, and you may enter. BRS offices are to the right, through the
lobby, keeping to the right to the end of the hall.