BRS Computing

420 Columbus Avenue, Suite 100

Valhalla, NY 10595

Telephone: 914-747-0201 or 914-747-4015

BRS Computing from Tappan Zee Bridge/New York State Thruway

WARNING: Note that commercial vehicles are prohibited from most parkways, including the Saw Mill River Parkway. Contact BRS for alternate directions if needed. The re-design and construction of the I87 and I287 interchange, and the rehabilitation of the I287 corridor is almost complete, although continuing construction may result in periodic lane closures and traffic delays.

Note: Signs are indicated in italics

Tappan Zee Bridge/New York State Thruway south.

After crossing Tappan Zee Bridge, exit at Route 287 (towards White Plains). As you merge onto 287, keep in right lane.

Take first exit, Saw Mill River Parkway and Elmsford, Route 119. Exit ramp splits; keep left for Saw Mill River Parkway North. Be careful, as exit ramp makes sharp left turn after split.

Continue on Saw Mill River Parkway North, past Taconic Parkway exit. Take next exit at Thornwood/Marble Avenue.

Exit ramp is very short. Keep in right lane. Turn right at light onto Marble Avenue.

Continue straight through hamlet of Thornwood. Marble Avenue becomes Kensico Road at first traffic light. The road climbs a hill, and becomes Columbus Avenue.

After passing Rose Hill Shopping Center entrance on left, continue through one more traffic light At second traffic light turn left onto Lozza Drive.

BRS Computing is located at 420 Columbus Avenue, first building on the right. Make an immediate right. Visitor parking is located directly in front of building. Inside the front door is an entry control panel. Dial 100 on the panel, and our phone will ring. Press zero to connect to the receptionist. When connected, tell us that you are at the front door, and our receptionist will release the lobby door lock, and you may enter. BRS offices are to the right, through the lobby, keeping to the right to the end of the hall.